PRODUCT CODE: 3KNYR 03KNYR
MPN: 3KNYR 03KNYR
3KNYR For Dell Latitude 7410 Palmest Touchpad Smart Card Assembly 03KNYR
QTY on hand: 10
Lead Time: Ships in 7 business days.
$ 189
$ 199
SKU
10
category:
Key words:
隐藏域元素占位
- DESCRIPTION
-
- Brand: DELL
- Commodity name: 3KNYR For Dell Latitude 7410 Palmest Touchpad Smart Card Assembly 03KNYR
- Commodity ID: 3KNYR 03KNYR
- MPN: 3KNYR 03KNYR
3KNYR For Dell Latitude 7410 Palmest Touchpad Smart Card Assembly 03KNYR
【Product Overview】
This is the palm-rest upper case assembly for the Dell Latitude 7410, supplied with the touchpad pre-installed and the smart card reader fitted, in the 4-cell battery configuration. It is a complete C-cover unit: shell, touchpad module and smart card reader arrive assembled.
Two configurations decide fitment on this platform, and both are stated in the part description for a reason. The smart card reader version carries an actual card slot in the right-hand palm area; the non-SC version has a blanked panel there, and the two are different part numbers. The 4-cell battery version likewise differs from the 3-cell deck — the battery sits in a different footprint and the palmrest underside is shaped to match. A 3-cell cover will not sit correctly on a 4-cell machine.
The keyboard is not included. On the Latitude 7410 the keyboard is a separate service part that transfers across from the old palmrest, and it is held in place from the underside.
【Product Specifications】
【Key Highlights】
- Smart card reader included — the version required by government, defence and banking fleets using CAC or PIV cards; the non-SC deck cannot be retrofitted
- 4-cell battery configuration — correct underside shaping for 4-cell machines; a 3-cell deck will not seat correctly
- Touchpad pre-installed — VK75D module fitted, no re-seating or calibration work
- Correct Latitude 7410 fitment — the 7400 and 7420 use different palmrests despite the shared 14-inch footprint
- Black deck finish — matches the standard 7410 interior; the aluminium variant is a different part number
- Complete C-cover swap — one disassembly sequence instead of a partial repair
- Inspected before dispatch — touchpad tracking, card reader function and clip integrity verified
【Package Includes】
- 1 × Palm-rest Assembly (C Cover), 4-cell version
- 1 × Pre-installed Touchpad Module (VK75D)
- 1 × Smart Card Reader
- Protective ESD bag and rigid foam packaging
Note: Keyboard, power button with fingerprint reader, battery, system board and screws are NOT included.
【Installation Guide and Precautions】
- Disable the battery in BIOS first. Power on, press F2 at the Dell logo →
Power Management→ Disable Built-in Battery → Apply Changes → Exit, then remove the base cover and disconnect the battery lead. - Transfer the keyboard before fitting. The keyboard is a separate part on this chassis and is retained from the underside. Removing it from the old deck and re-seating it correctly takes longer than the palmrest swap itself.
- Confirm the battery configuration. A 4-cell deck on a 3-cell machine leaves the battery sitting proud; a 3-cell deck on a 4-cell machine will not close. Check the battery label before ordering.
- Photograph the smart card reader flex. The SC reader connects through a short ribbon at the right edge. It folds under the deck and is easy to pinch when the keyboard goes back in.
- Do not lose the power button. It sits in the top-right corner of the deck and is not included with the palmrest — it is the single most commonly missing part after a swap.
- Check the touchpad FPC seating. The VK75D module connects through a ZIF connector; the locking bar must be open before insertion and closed after. Partial seating gives a dead touchpad with no error.
- Do not over-torque the chassis screws. The deck is a thin composite shell; over-torqued screws crack the bosses and the damage is not repairable.
- Test before closing. Reconnect the battery, power on, and verify touchpad tracking across the full surface, smart card reader detection with an actual card, and every keyboard key.
⚠️ Compatibility warnings — please read before ordering:
- Latitude 7410 / E7410 only. Not compatible with the 7400, 7420, 7430 or 7440 — different chassis geometry.
- Smart Card version. The non-SC palmrest has a blanked panel where this one has a card slot; they are different part numbers.
- 4-cell battery deck. The 3-cell version is shaped differently underneath.
- Keyboard not included. It is a separate service part and must be transferred from the original deck.
- Colour variant must be confirmed. The aluminium and standard finishes are different DP/Ns.
Related Products