PRODUCT CODE: H40H0 0H40H0
MPN: H40H0 0H40H0
0H40H0 For Dell Latitude 5340 5350 Laptop 13.3" FHD Complete Screen Assembly Silver Grey
QTY on hand: 10
Lead Time: Ships in 7 business days.
$ 260
$ 270
SKU
10
category:
Key words:
隐藏域元素占位
- DESCRIPTION
-
- Brand: DELL
- Commodity name: 0H40H0 For Dell Latitude 5340 5350 Laptop 13.3" FHD Complete Screen Assembly Silver Grey
- Commodity ID: H40H0 0H40H0
- MPN: H40H0 0H40H0
For Dell Latitude 5340 5350 Laptop 13.3" FHD Complete Screen Assembly Silver Grey 0H40H0
【Product Overview】
This is a complete 13.3-inch FHD upper assembly (LCD lid) for the Dell Latitude 5340 and Latitude 5350 laptop — the standard clamshell chassis, not the 2-in-1 convertible. It arrives fully built: LCD panel, front bezel, LCD back cover, hinges, camera module, and antenna cables pre-assembled, so replacement is a single lid swap rather than a panel-and-bezel rebuild.
The panel is a 1920×1080 IPS unit at 60 Hz with an anti-glare finish on a 16:9 canvas — Dell's standard business display for this generation. It is the specification that shipped in volume across corporate fleet orders, which is why demand comes almost entirely from repair shops and ITAD refurbishment programs that value repeatability across batches over headline specs.
The finish is Silver Grey, Dell's Titan Gray in channel terms. Buyers matching a lid to an existing chassis should confirm against their unit's colour code.
【Product Specifications】
【Key Highlights】
- Correct chassis fitment — built for the Latitude 5340 / 5350 laptop; the 2-in-1 uses a different back cover and hinge set and will not accept this lid
- Complete upper assembly — panel, bezel, back cover, hinges, camera, and antenna leads pre-fitted; one disassembly sequence, no bonding or bezel adhesive
- 1920×1080 16:9 IPS — the standard business panel for this generation, with the exact aspect ratio the factory bezel was cut for
- Anti-glare matte finish — the practical choice for office and field use; resists reflections and fingerprint smearing
- Silver Grey finish match — colour-consistent with the Titan Gray chassis for fleet and resale presentation
- Fleet-consistent supply — same DP/N across orders, which matters more to ITAD buyers than any single spec
- Tested and ESD-packed — every unit verified for backlight uniformity and dead pixels before dispatch
【Package Includes】
- 1 × Complete 13.3" FHD 1920×1080 IPS Upper Assembly (Silver Grey)
- 1 × Pre-installed Camera Module
- 1 × Pre-routed WLAN Antenna Cable Set
- 1 × Front Bezel and LCD Back Cover (factory fitted)
- 1 × Hinge Pair (factory fitted)
- Protective ESD bag and rigid foam packaging
Note: Base cover, battery, and system-side screws are not included.
【Installation Guide and Precautions】
- Disable the battery in BIOS first. Power on, press F2 at the Dell logo →
Power Management→ Disable Built-in Battery → Apply Changes → Exit. The unit shuts down. Mandatory before any internal work on Latitude platforms. - Remove the base cover before the display assembly. On the 5340/5350 laptop the display cable and antenna leads route through the hinge into the system board — the lid cannot be freed from above.
- Photograph the antenna routing through the hinge. The WLAN leads follow a fixed path inside the hinge barrel. Reversing them pinches the cable and produces intermittent dropouts that only appear at certain lid angles.
- Work ESD-safe. Wrist strap and grounded mat. The camera flex and antenna coax are not covered for handling damage.
- Handle by the edges only. Do not press the panel centre or the back of the panel — pressure on an IPS stack creates permanent mura, visible as pale blotches on white backgrounds.
- Seat the eDP connector square and latch fully. Insert perpendicular, then close the locking bar. Partial seating causes no-backlight, flicker, or a single-colour wash — the three most common "dead panel" returns.
- Test before final torque. Power on with the assembly loosely held. Check full-screen uniformity at maximum brightness and camera output. Only then torque the hinges.
⚠️ Compatibility warnings — please read before ordering:
- Laptop only. Not compatible with the Latitude 5340 2-in-1 or 5350 2-in-1 — different back cover, hinge geometry and lid structure.
- 13.3" 16:9 only. 1920×1200 (FHD+) panels from other Latitude generations will not fit this bezel.
- 30-pin non-touch vs 40-pin touch. Confirm which your unit needs — the cable will not interchange.
- Verify camera type (RGB vs IR) before dispatch. An IR-camera unit fitted with an RGB lid loses Windows Hello.
Related Products